Description
LK4935 – KNORR LK4935 / IVECO TWIN CYLINDER AIR COMPRESSOR W/O GEAR – NEW
PART NUMBER(S):
Fleet Products: LK4935 (New) | Replaces OE: Iveco: 504353253, 504055169, 504066638, 504079461, 504079463, 5001860681, 5001860839, 5006028509, 41211340 | Knorr-Bremse: K002123, K002121, K022265N00, K000839
DESCRIPTION:
Model: Knorr LK4935 / Iveco Twin Cylinder Air Compressor Without Gear
Vehicles: IVECO SOR NB Tector 6, Crossway Tector 6, Crossway 10.8M / 12M / 13M Tector 7, Crossway LE 10.8M / 12M / 13M Tector 7, Urbanway 12M Tector 7, and Heuliez GX137 / GX337 / GX437 Tector 7 applications from 2006+
• Bore: 86 mm
• Stroke: 54 mm
• Swept Volume: 628 CC
• No. of Cylinders: 2
• Through Drive: Yes
• Cooling: Water cooled
• Water Cooled Valve Plate: Yes
• Mounting: Flange
• Lubrication: Engine oil
• Water Port Size: M18 x 1.5
• Water Inlet Port Size: M18 x 1.5
• Water Delivery Port Size: M18 x 1.5
• Air Inlet Port Size: M26 x 1.5
• Air Delivery Port Size: M26 x 1.5
• Unloader Port Size: M12 x 1.5
• Gear: Not included
Applications:
Used on IVECO bus, commercial vehicle, and industrial applications requiring a flange-mounted, engine-oil-lubricated, water-cooled twin cylinder compressor with through drive and no gear supplied. Match by 86 mm bore, 54 mm stroke, port thread sizes, flange mount, through-drive configuration, and cooling setup before installation.
CROSS-REFERENCE(S):
LK4936, LK-4935, 504066169, 500388057, 504080658, 504293718, K002121ES, K002123000, K022265N03, K022265X00, Y005344, 66A098R, 01 010244 25, E5001860681, E5001860839, E5006028509, K00212300, SEB01873004, SEB01878004, SEB22547, SEB22548, SEB22549, SEB22550, 649.01.1000, LK4937, 99500388057, K001127, K031852N00, 1500180001, 570105, 570321, 578321, KB001342, K112296K50, K041488K50
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Confirm the compressor is a twin cylinder, 86 mm bore, through-drive, flange-mounted unit without gear before installation
✔ Verify all port sizes and thread types match the application: water M18 x 1.5, air inlet M26 x 1.5, air delivery M26 x 1.5, and unloader M12 x 1.5
✔ Ensure the application requires a water-cooled compressor with engine oil lubrication and water-cooled valve plate
✔ Confirm IVECO bus or equipment fitment before installation
✔ Match the existing gear/drive setup because this compressor is supplied without gear
Warranty Information
