Description
5013059N BA-922 CAT TWIN COMPRESSOR – 40 TOOTH C15/C18 ACERT – NEW
PART NUMBER(S):
Fleet Products: 5013059N (New), 5013059X (Remanufactured) | Replaces OE: Bendix: 5013059, 801595, K055603 | Caterpillar: 10R-6316, 226-9580, 304-2693 | International: 3016002C91, 3861777C91, 3861778C91
DESCRIPTION:
Model: Bendix BA-922 CAT Twin-Cylinder Air Brake Compressor
Vehicles: Caterpillar C15/C18 ACERT pre-2007 diesel engine applications including truck, industrial, petroleum and mobile hydraulic power unit applications
• Compressor Type: Twin-cylinder air brake compressor
• Drive: Engine driven, 40-tooth gear
• Drive Gear Diameter: 4.5 in
• Air Inlet: Top
• Air Discharge: Top
• Cylinders: 2, 720 CC
• Bore × Stroke: 3.622 in × 2.125 in
• Rated Displacement: 31.7 CFM @ 1250 RPM
• Air Flow: 25.2 CFM @ 1800 RPM / 120 PSI; 38.4 CFM @ 3000 RPM / 120 PSI
• Maximum Speed: 3000 RPM
• Power Requirement: 8.73 HP loaded / 1.96 HP unloaded @ 1800 RPM / 120 PSIG
• Minimum Coolant Flow: 2.0 GPM @ maximum RPM
• Minimum Oil Pressure: 15 PSI
• Minimum Governor Cut-Out Pressure: 120 PSI
• Oil Supply Line: 3/16 in I.D.
• Unloader Line: 3/16 in I.D.
• Temperature Range: 170°F inlet / 350°F discharge
• Air Inlet Port: 1 3/16-12 UN or M27 × 2
• Air Discharge Port: 7/8-14 UNF or M22 × 1.5
• Water Ports: 3/8 in NPT or M18 × 1.5
• Unloader Port: 1/8-27 NPT or M10 × 1.5
• Safety Valve Port: M16 × 1.5 or 3/4-16 UNF
• Oil Port: 7/16-20 UNF or M12 × 1.5
• Crankshaft Thread: M20 × 1.5
CROSS-REFERENCE(S):
5011624, 5011625, 5013063, 5013070, 5013071, 5013071X, 5020479, 5020482, 801594, K023904, K023905, K023906, K023907, K041741, K048564, K048565, K048566, K048567, K048568, K048569, K055604, K066832, K098559, K098560, K209339, 0R-2768, 10R-2768, 10R-6317, 10R2768, 10R6316, 10R6317, 2269580, 257-9346, 2579346, 3042693, 3042694, 440-1616, 440-1618, 4401616, 4401618, N3861778C91, 745-801595, 060-801595, 703618AT, 705514AT, 801594BXW, 801595BXW, BAN801595, BEN801595, , BW801595, BW801594, BWK055603, BX801595, R9555013058X, R9555013059X, TWDBEN801595, ZAC801595
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Prime the oil supply line before initial startup
✔ Verify all air, coolant and oil connections are properly sealed
✔ Drain all air reservoirs before servicing the air brake system
✔ Inspect compressor mounting hardware and fittings before operation
✔ Check connected air, oil and coolant lines before returning the vehicle to service
✔ Torque cylinder head fasteners to 265–292 in-lb
✔ Torque governor adapter fasteners to 195–213 in-lb
✔ Torque rear end cover fasteners to 195–213 in-lb
✔ Torque crankshaft nut (M20 × 2.5) to 1858–2567 in-lb (210–290 Nm)
✔ Torque inlet port fitting to 575–637 in-lb
✔ Torque discharge port fitting to specification for the installed thread type
✔ Torque water port fitting to specification for the installed thread type
✔ Torque safety valve port fitting to specification for the installed thread type
Warranty Information
