Description
KN24000-G - AUTOMATIC DRAIN VALVE WITH 60" MANUAL CABLE, 1/4" NPT
PART NUMBER(S):
Fleet Products: KN24000-G | Replaces OE: Haldex: KN24000, N20878A | Bendix: 281923, 281924 | Automann: 170.281923 | WABCO: 9343150390 | Meritor: R955281923N | Mack: 20-QE-1189 | Navistar: 777-915-C | Ford: D0HA2A131A
DESCRIPTION:
Model: Automatic Air Reservoir Drain Valve with Manual Cable
Vehicles: Heavy-duty trucks and trailers with compatible air brake wet tanks
• Valve Type: Automatic reservoir drain valve with manual cable actuation
• Reservoir Port: One 1/4"-18 NPT
• Cable Length: 60" with closed-loop ends
• Heating: Non-heated
• Mounting: Side or bottom of the wet tank
• Operation: Cycles with air-tank pressure variation and permits manual drainage by cable
• Construction: Corrosion-resistant design with one moving part
• Function: Removes accumulated moisture and contaminants from the air reservoir
• Service Configuration: Cable-operated service unit, automatic moisture drainage with an accessible manual cable control.
CROSS-REFERENCE(S):
034043, 0798MM5, 0942MM5007, 101191, 101415, 101416, 12000, 13AV4121, 1400050, 14245, 17322000, 20QE1189, 20QE1214P1, 20QE19323P1, 20QE355, 20QE389, 20QEA389, 215323H1, 23440806, 24000, 281923, 281924, 281865, 282569, 283011, 283090, 283174, 283347, 283817, 285552, 286665, 3512450, 422754R91, 53100563, KN24000, 671114, 700731, 715030039, 777915C92, 778063C, 778063C91, 778063C92, 78103577, 9343160010, 9343160020, 9343160040, 9343160050, 9343160060, 9343160070, 9343160390, 942MM5005, N20878, N20878A, N20878B, N20878C, N20878D, N20878E, N20878F, N20878H, N20878K, N20878M, N20878N, N20878P, N20879B, D3HS2A131AA, D8HZ2A121A, D9HT2A131AA, D9HT2A131BA, D9HZ2A131A, D9HZ2A131B, E0HZ2A131B, K29580, K29581, K295811, K295812, K295107, K295240, 3660, A271, U420V3401, ACA0172A700, ACA01720700, 20QE1932, 20QE19323, 3915331, 3R7729, 3R7729T, 401216, 401269, 566838, 5935, 59350, 5R8970, 6S2634, 14360
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Confirm the wet-tank connection accepts the single 1/4"-18 NPT port.
✔ Mount the valve on the side or bottom of the wet tank in the approved orientation.
✔ Apply air-system-compatible thread sealant without allowing sealant to enter the valve.
✔ Route the 60" cable without sharp bends and keep the operating loop accessible.
✔ Pressurize and leak-test the system, then verify automatic and manual drainage.
Warranty Information
