Description
289941X TF-700 DETROIT AIR BRAKE COMPRESSOR REMANUFACTURED
PART NUMBER(S):
Fleet Products: 289941X (Remanufactured) | Replaces OE: Bendix: 289941, 101650, 280282, 280526, 280570, 280607, 280891, 282011, 282402, 283955, 288260, 289267, 289289, 289786, 289863, 289864, 289937, 289940 | GMC: 8921208
DESCRIPTION:
Model: Bendix Tu-Flo 700 Detroit Air Brake Compressor
Vehicles: Detroit Diesel engine platforms used in GMC trucks and commercial vehicles
• Type: Single-stage reciprocating piston compressor
• Mounting: Flange mount
• Drive: Engine driven
• Cooling: Water cooled
• Air inlet location: Right
• Air outlet location: Top or left
• Tilt: 0°
• Cylinders: 2
• Bore × Stroke: 2.75 in × 1.81 in
• Rated displacement: 15.5 CFM @ 1250 RPM
• Maximum speed: 3000 RPM
• Minimum coolant flow: 2.5 GPM
• Minimum unload pressure: 60 PSI
• Maximum inlet temperature: 250°F
• Maximum discharge temperature: 400°F
• Discharge line: 5/8 in OD copper
• Oil return line: 5/8 in OD
• Oil supply line: 1/4 in OD
• Unloader line: 1/4 in OD
• Coolant line: 1/2 in OD
Applications:
Designed for Detroit Diesel engine applications requiring a Bendix Tu-Flo 700 air brake compressor. Supplies compressed air for heavy-duty air brake systems using the original flange mounting, cooling, and discharge configuration. EL16050X compressors may also be used for this application.
CROSS-REFERENCE(S):
289941, 101650, 280282, 280526, 280570, 280607, 280891, 282011, 282402, 283955, 288260, 289267, 289289, 289786, 289863, 289864, 289937, 289940, 8921208, CC289342, BAR289342, HVG289342, 104356, 282013, 284924, EL16160, EL16050X, 745-289941X, BW289941X, 303GB3112, 3945446, 46002, 5000942, 5139285, 5144305
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify discharge port orientation before installation
✔ Confirm flange mounting surface is clean and flat before fitting the compressor
✔ Ensure air and coolant passages are flushed before installation
✔ Replace all mounting gaskets and seals during installation
✔ Prime the compressor with clean engine oil before initial startup
✔ Check for air, oil, and coolant leaks after the system reaches operating pressure
✔ Torque all mounting hardware and fittings to OEM specifications
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
