Description
TF-700 DETROIT COMPRESSOR REMANUFACTURED
PART NUMBER(S):
Fleet Products: 106793X (Remanufactured) | Replaces OE: Bendix: 106793, 106793X, 107495, 289282, N7225 | Detroit Diesel: 23509473, R23509473 | GM: 5133913, 5139316
DESCRIPTION:
Model: Bendix Tu-Flo 700 Detroit Air Brake Compressor
Vehicles: Detroit Diesel engine applications used in heavy-duty trucks and commercial vehicles
• Cooling: Water cooled
• Mounting: Flange mount
• Drive type: Engine driven
• Air inlet location: Right (106793X, 289915X); Left (289925X)
• Air outlet location: Top or left
• Tilt: 0° (289925X), 75° (106793X, 289915X)
• Cylinders: 2
• Bore × Stroke: 2.75 in × 1.81 in
• Rated displacement: 15.5 CFM @ 1250 RPM
• Maximum speed: 3000 RPM
• Minimum coolant flow: 2.5 GPM
• Minimum unload pressure: 60 PSI
• Maximum inlet temperature: 250°F
• Maximum discharge temperature: 400°F
• Discharge line: 5/8 in OD copper
• Oil return line: 5/8 in OD
• Oil supply line: 1/4 in OD
• Unloader line: 1/4 in OD
• Coolant line: 1/2 in OD
Applications:
Designed for Detroit Diesel engine applications requiring a Bendix Tu-Flo 700 air compressor. Supplies compressed air for heavy-duty air brake and auxiliary pneumatic systems using the original mounting, cooling, and port configuration.
CROSS-REFERENCE(S):
HVG289915, 745-X289915, 175289915, BEN289915X, BXX289915X, BEX289915X, ZZ289915, E-BN289915X, EL16250, ZZ289915X, 289925X, 289915X, 275777, 277560, 278445, 278681, 279890, 106793, 23509473, 280573, 107494, 289263, 289790, 289915, EBN278445X, EBN289790X, KN16250, KN16250N, KN16250X, KNT16250, EL16250X, ZZEL16250, R23509473, EMDEL16250X, N7225, 275631, 278681X, 366840C91, 5133913, 5139316, 5396-EL16250X, 767653026213, EL16250XB1, HDXEL16250X, L3012P, MBIEL16250X, MIDEL16250X, R955EL16250X, E-BN278445X, E-BN289790X, E-MDEL16250X, 108622, 289915BXR, ZZEL16250X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify mounting angle and port orientation before installation
✔ Prime the compressor with clean engine oil before initial startup
✔ Ensure coolant, oil, and air lines are clean and free of restrictions
✔ Replace all mounting gaskets and seals during installation
✔ Check for air, oil, and coolant leaks after the system reaches operating pressure
✔ Torque all mounting hardware and fittings to OEM specifications
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
