Description
289347X TF-700 MACK AIR BRAKE COMPRESSOR REMANUFACTURED
PART NUMBER(S):
Fleet Products: 289347X (Remanufactured), Replaceable with 289822 (TF-400), 280737 (TF-500), 286563 (TF-501), 287828 (TF-600) | Replaces OE: Bendix: 102267, 102289, 102290, 272921, 280737, 287828, 289257, 289347, 745-289347X, 04625289347, BW289347X | Mack: 0272921, 0280737, 280737X, 0287828, 0289257, 0289347, MACK 303-GB-4203
DESCRIPTION:
Model: Bendix Tu-Flo 700 Mack Air Brake Compressor
Vehicles: Mack-powered Volvo platforms with TF-700 engine-mounted compressors
• Mounting: Flange mount
• Drive: Engine driven
• Cooling: Water/Air cooled
• Air inlet location: Right, viewed from rear
• Air outlet location: Top
• Discharge type: Threaded flange
• Cylinders: 2
• Bore × Stroke: 2.75 in × 1.81 in
• Rated displacement: 15.5 CFM @ 1250 RPM
• Maximum speed: 3000 RPM
• Minimum coolant flow: 2.5 GPM
• Minimum unload pressure: 60 PSI
• Maximum inlet temperature: 250°F
• Maximum discharge temperature: 400°F
• Discharge line: 5/8 in OD copper
• Oil return line: 5/8 in OD
• Oil supply line: 1/4 in OD
• Unloader line: 1/4 in OD
• Coolant line: 1/2 in OD
• Lubrication: Engine pressurized oil system
Applications:
Designed for Mack engine-mounted applications requiring a Bendix Tu-Flo 700 air brake compressor. Supplies compressed air for heavy-duty air brake and auxiliary pneumatic systems using the original flange mount, drive interface, and port configuration.
CROSS-REFERENCE(S):
289347X, 102267, 102289, 102290, 272921, 0272921, 280737, 0280737, 280737X, 287828, 0287828, 289257, 0289257, 289347, 0289347, 745-289347X, 04625289347, BW289347X, MACK-303-GB-4203, 289822, 286563
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Confirm flange mounting surface is clean and flat before fitting the compressor
✔ Verify right-side air inlet and top discharge orientation from the rear
✔ Confirm Mack engine bracket and drive interface before installation
✔ Replace all mounting gaskets and seals during installation
✔ Ensure coolant, oil, and air passages are clean and unrestricted
✔ Prime the compressor with clean engine oil before initial startup
✔ Check for air, oil, and coolant leaks after the system reaches operating pressure
✔ Torque all mounting hardware and fittings to OEM specifications
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
