Description
289340X TF-700 MACK COMPRESSOR EXTENDED FLANGE MOUNT REMANUFACTURED
PART NUMBER(S):
Fleet Products: 289340X (Remanufactured) | Replaces OE: Bendix: 101280, 102305, 102945, 102979, 103968, 104305, 104306, 104978, 104979, 282800, 283825, 284306, 284307, 285100, 285108, 288710, 289251, 289258, 289340, 289349 | Mack: 303GB-578, 303GB-587, 303GB-589, 303GB-590, 303GB-4201-R
DESCRIPTION:
Model: Bendix Tu-Flo 700 Mack Air Brake Compressor
Vehicles: Mack engine applications with extended flange mount
• Cooling: Water cooled
• Air inlet location: Right
• Air outlet location: Right or top
• Discharge type: Threaded, optional right or top
• Mounting: Extended flange mount
• Drive type: Pulley drive
• Cylinders: 2
• Bore × Stroke: 2.75 in × 1.81 in
• Rated displacement: 15.5 CFM @ 1250 RPM
• Maximum speed: 3000 RPM
• Minimum coolant flow: 2.5 GPM
• Minimum unload pressure: 60 PSI
• Maximum inlet temperature: 250°F
• Maximum discharge temperature: 400°F
• Discharge line: 5/8 in OD copper
• Oil return line: 5/8 in OD
• Oil supply line: 1/4 in OD
• Unloader line: 1/4 in OD
• Coolant line: 1/2 in OD
• Equipped for power steering
• Includes installation gaskets
Applications:
Designed for Mack engine applications requiring a Bendix Tu-Flo 700 air compressor with an extended flange mount. Supplies compressed air for heavy-duty air brake and auxiliary pneumatic systems and supports power steering-equipped applications using the original mounting configuration. Midland EL16111 compressors may also be used for this application.
CROSS-REFERENCE(S):
101280, 102305, 102945, 102979, 103968, 104305, 104306, 104978, 104979, 282800, 283825, 284306, 284307, 285100, 285108, 288710, 289251, 289258, 289340, 289349, 303GB-578, 303GB-587, 303GB-589, 303GB-590, 303GB-4201-R, E-BN289340, W:BW-289340, BEN289340, BEX289340, 289340BXR, CC289340, 0R289340, 745X289340, 175289340X, 04625289340X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify extended flange mount configuration before installation
✔ Confirm port orientation from the rear before installation
✔ Prime the compressor with clean engine oil before initial startup
✔ Replace all mounting gaskets and seals during installation
✔ Ensure coolant, oil, and air lines are clean and free of restrictions
✔ Check for air, oil, and coolant leaks after the system reaches operating pressure
✔ Torque all mounting hardware and fittings to OEM specifications
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
