Description
286554X - TF-501 CUMMINS AIR BRAKE COMPRESSOR - REMANUFACTURED
PART NUMBER(S):
Fleet Products: 286554X (Remanufactured) | Replaces OE: Bendix: 101556, 286037, 286103, 286554, 286970, 287108 | OE: 586041
DESCRIPTION:
Model: Bendix Tu-Flo 501 (TF-501) Cummins Air Brake Compressor
Vehicles: Cummins NH, NTC, KT, and KTA diesel-equipped IHC / International and White truck applications
• Mounting: Engine-driven flange mount
• Cooling: Water / air cooled
• Air Inlet Location: Left
• Air Outlet Location: Left
• Discharge Type: Flange
• Drive Type: Gear drive
• Drive Gear: Included / pre-installed
• No. of Cylinders: 2
• Bore x Stroke: 2.625 in x 1.50 in
• Displacement @ 1250 RPM: 12 CFM
• Displacement Per Revolution: 16.5 cu in
• Max RPM: 3000 naturally aspirated
• HP @ 3000 RPM / 100 PSI: 4.9 HP
• Minimum Coolant Flow @ Max RPM: 2.5 GPM
• Minimum Unload Pressure: 60 PSI
• Temperature Range: 250°F inlet / 400°F discharge
• Line Sizes: 5/8 in OD copper discharge, 5/8 in OD oil return, 1/4 in OD oil supply, 1/4 in OD unloader, 5/8 in ID inlet cavity to air cleaner, 1/2 in OD coolant
• Includes: Installation gaskets
Applications:
Used on Cummins NH, NTC, KT, and KTA diesel-powered IHC / International and White truck applications requiring a Bendix Tu-Flo 501 compressor with engine-driven flange mounting, pre-installed drive gear, left-side air inlet, left-side outlet, and flange discharge. This compressor supplies air for service brake and auxiliary pneumatic systems and should be matched by OE number, Cummins flange configuration, drive gear setup, and port orientation before installation.
CROSS-REFERENCE(S):
286554X-BW, BW-286554X, BXX286554, WBW286554, BEN286554, E-BN286554X, R955286554X, EL13040X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify Cummins NH, NTC, KT, or KTA fitment, engine-driven flange mounting, and drive gear configuration before installation
✔ Confirm left-side inlet and left-side outlet orientation viewed from the rear of the compressor
✔ Confirm drive gear alignment and Cummins mounting flange compatibility before startup
✔ Use installation gaskets as required during installation
✔ Check discharge, oil supply, oil return, unloader, inlet cavity, and coolant lines for restrictions before startup
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
