Description
286526X – TF-501 PULLEY DRIVE COMPRESSOR
PART NUMBER(S):
Fleet Products: 286526X (Remanufactured) | Replaces OE: Bendix 102822, 104436, 104437, 106169, 285930, 285953, 285954, 285955, 285965, 285966, 286128, 286131, 286134, 286218, 286526, 286527X, 286528RX, 286529, 286585X, 286586X, 286592X, 286641, 286642, 286684, 287303, 287483, 288062, 288974, 289751, 7020001 | Navistar 143018R91, 149628R91, 179022R91, 295435C91, 398568C91, 398568C92, 861448R91, 861448R92, 861448R93, 97193R91, 990007C91, 990178C91, 990187C91, 990210C91, 997065R91
DESCRIPTION:
Model: TF-501 Pulley Drive Compressor
Vehicles: reightliner M2, International 4300, Ford F-650/F-750, Hino 338, Trailer applications 2000+, D.D.A.D., Oshkosh, Kershaw, Allis-Chalmers, Eaton-Batavia, Crane Carrier, G.M.C., F.W.D.
• Bore x Stroke: 2.625 in x 1.50 in
• Discharge Line: 5/8 in OD copper
• Oil Return Line: 5/8 in OD
• Oil Supply/Unloader Line: 1/4 in OD
• Inlet Cavity Line: 5/8 in ID, to air cleaner
• Coolant Line: 1/2 in OD
• Unloader Port: 1/8"-27 NPT
• Air Inlet/Outlet: Right
• Discharge: Flange
• Mounting: Base or flange mount
• Drive: Pulley drive
• Cooling: Water and air cooled
• Cylinders: 2
• Displacement: 12 CFM at 1250 RPM; 16.5 cu in/rev
• Maximum RPM: 3000, naturally aspirated
• Power: 4.9 HP at 3000 RPM / 100 PSI
• Minimum Coolant Flow: 2.5 GPM at maximum RPM
• Minimum Unload Pressure: 60 PSI
• Maximum Temperature: 250°F inlet / 400°F discharge
• Interchange: EL13060X
CROSS-REFERENCE(S):
04625286592X, 13020, 286526X, 286528X, 286535X, 4015800, 4015801, 4015802, 4015803, BEN286591X, BWC286592X, BW286526X, E-BN286526X, EL130200, FP286526X, H286526X, MHC286526X, NTP286526X, PHD286526X, RTC286526X, VIPAR286526X
A cross-reference listing means this part is a suitable replacement for the part numbers listed.
IMPORTANT INSTALLATION NOTES:
✔ Mount the compressor using base or flange mount, ensuring it is fastened securely.
✔ Torque pulley nut to 85-95 ft-lbs after aligning belts. Ensure pulley runs true within 0.005 inches.
✔ Apply thread sealant to intake fitting threads and torque to 18-22 ft-lbs. Avoid overtightening.
✔ Inspect discharge line for wear and torque fitting to 25-28 ft-lbs using a backup wrench.
✔ Adjust belt tension to 0.6-inch deflection under 10 lbs pressure at midpoint, recheck after 1 hour.
✔ Lubricate unloader valve O-ring with silicone grease and torque to 12-15 ft-lbs during assembly.
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
