Description
276166X TF-400 DETROIT COMPRESSOR – REMANUFACTURED
PART NUMBER(S):
Fleet Products: 276166X (Remanufactured) | Replaces OE: Bendix: 276136, 276169, 280094, 280254, 280363, 280367, 282384, 283367, 286294, 286296, 102655 | CAT: 1W6473
DESCRIPTION:
Model: Bendix TF-400 Detroit Air Brake Compressor
Vehicles: Detroit Diesel engine applications in heavy trucks, semi trucks, 18-wheelers and commercial trucks
• Cooling: Water cooled
• Air Inlet Port: Left side, viewed from rear
• Air Outlet Port: Left side, viewed from rear
• Mounting: Flange mount
• Port Orientation: Viewed from rear
• Tilt: 0°
• Discharge Type: Flange discharge
• Number of Cylinders: 2
• Bore Size: 2.0625 in
• Stroke: 1.5 in
• Displacement at 1,250 RPM: 7.25 CFM
• Maximum Recommended RPM: 3,000 water cooled; 2,400 air cooled
• Minimum Coolant Flow at Maximum RPM: 2.5 GPM
• Required Air Flow: 250 CFM
• Approximate Horsepower at 1,250 RPM: 1.2 HP
• Maximum Inlet / Discharge Air Temperature: 250°F / 400°F
• Minimum Unloader Pressure: 60 PSI
• Minimum Oil Pressure: 5 PSI at idle; 15 PSI at governed speed
• Oil Capacity: 0.53 qt (self-lubricated)
• Minimum Line Sizes: 1/2 in O.D. discharge; 3/8 in O.D. coolant; 1/4 in O.D. oil supply; 1/2 in O.D. oil return; 5/8 in I.D. air inlet
Applications:
Used on Detroit Diesel engine applications requiring a TF-400 water-cooled flange-mount compressor with 0° tilt and left-side inlet and outlet ports. The compressor supplies compressed air for brake and auxiliary pneumatic systems and is typically replaced when air output decreases, leakage occurs, or internal wear affects system recharge.
CROSS-REFERENCE(S):
108202TP
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Installation kit is recommended for Detroit Diesel flange-mount compressors
✔ View port orientation from the rear of the compressor
✔ Confirm left-side inlet, left-side outlet and flange discharge orientation before installation
✔ Confirm 0° tilt and flange mount compatibility before installation
✔ Flush and secure all coolant lines before startup
✔ Check for air, oil and coolant leaks after installation
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
