Description
107507X – TF-750 CUMMINS AIR BRAKE COMPRESSOR – REMANUFACTURED
PART NUMBER(S):
Fleet Products: 107507X (Remanufactured), Replacable with 284699X (TF-500), 286554X (TF-501), 107506X (TF-550), 284714X (TF-600), 289339X (TF-700) | Replaces OE: Bendix: 065198, 107001, 107507, 107781, 107819, 107820, 108584, 109198, 5001711, 5003265, 65198 | Cummins: 3016642, 3069181, 3074471, 3166446, 3417959, 3609998 | Flexible: 97821800151, 97827900151 | Gilligs: 82-17427-000, 8217427000, 8217427001 | Mack: 745-107507X, 745-X107507, 745X107507 | Navistar: 1672564C91, 1672564C92, 1694007C91 | Neoplan: PC01000001-001 | New Flyer: 6328219R | North: 436.02.3604.704, 436023604704, 436023804704, 5012943 | OBI: 2GH918 | Volvo: 8062235, 85102169
DESCRIPTION:
Model: Bendix Tu-Flo 750 (TF-750) Air Brake Compressor
Vehicles: Cummins In Line ISM, N14, M11 engines
• Bore x Stroke: 2.78 in x 1.87 in
• Minimum Line Sizes: 1/2 in ID discharge/oil return, 3/8 in ID coolant, 3/16 in ID oil supply/unloader, 5/8 in ID air inlet
• Port Sizes: 1/2-14 NPT water in/out, 1/2-14 NPT air discharge, 1/8-27 NPT governor/oil inlet
• Air Inlet Location: Left side
• Air Outlet Location: Left or top, selectable
• Mounting: Flange mount
• Cooling: Water-cooled head, air-cooled crankcase
• No. of Cylinders: 2, 375 CC
• Flow: 16.5 CFM at 1250 RPM
• Maximum RPM: 2400
• Power: 3.2 HP at 1250 RPM / 120 PSIG
• Minimum Coolant Flow: 2.5 GPM at maximum RPM
• Minimum Unload Pressure: 60 PSIG
• Oil Pressure: 15 PSIG at idle and governed
• Temperature: 250°F inlet / 400°F discharge
• Includes: Gear and gasket installation kit
Applications:
Used on heavy-duty air brake systems for Cummins In Line ISM, N14, and M11 engine applications using the TF-750 compressor configuration. The compressor supplies air for service brake and auxiliary air system operation and is typically replaced due to reduced air output, overheating, oil carryover, or internal compressor wear.
CROSS-REFERENCE(S):
EL16040X, 0107001, 0107507, 0107781, 0107819, 0107820, 0108584, 0109198, 107001X, 107507B1, 107507BXR, 107507X-BW, 107819X, 107820X, 108584X, 109198X, 211879, 3069181RX, 3417959RX, 5001711X, 5003265X, 065198BXW, 97-8218-00151, ABP N13AC 3074471, BC2-25564, BW 107507X, BX107507B1, BX107507X, EBN107507X, R955107507X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify mounting, gear, inlet, outlet, and port configuration before installation
✔ Maintain minimum 2.5 GPM coolant flow and do not exceed 2400 RPM
✔ Replace all gaskets and fittings, and use the correct discharge line size with continuous downward slope
✔ Prime oil lines and confirm oil supply/return lines are clean, unrestricted, and leak-free before startup
✔ Suggested torque: cylinder head 300–360 in-lb; inlet/discharge fittings 175–225 in-lb; pipe plugs 35–270 in-lb; crankshaft castle nut 1200–1400 in-lb; crankshaft metric nut 2640–3048 in-lb
SOLD AS REMANUFACTURED – CORE RETURN REQUIRED
Built to OEM standards — thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
