Description
106290X - TF-501 DETROIT AIR BRAKE COMPRESSOR - REMANUFACTURED
PART NUMBER(S):
Fleet Products: 106290X (Remanufactured) | Replaces OE: Bendix: 106240, 106290, 106374, 109866, 286538, 286619, 286623 | Detroit Diesel: 8929762
DESCRIPTION:
Model: Bendix Tu-Flo 501 (TF-501) Detroit Air Brake Compressor
Vehicles: Detroit Diesel 0° tilt engine applications in heavy trucks and 18 wheelers
• Cooling: Water / air cooled
• Air Inlet Location: Left
• Air Outlet Location: Left
• Discharge Type: Flange
• Drive Type: Gear driven
• Mounting: Flange mount
• Head Rotation: Left
• Block Rotation: Left
• No. of Cylinders: 2
• Bore x Stroke: 2.625 in x 1.50 in
• Displacement @ 1250 RPM: 12 CFM
• Displacement Per Revolution: 16.5 cu in
• Max RPM: 3000 naturally aspirated
• HP @ 3000 RPM / 100 PSI: 4.9 HP
• Minimum Coolant Flow @ Max RPM: 2.5 GPM
• Minimum Unload Pressure: 60 PSI
• Temperature Range: 250°F inlet / 400°F discharge
• Line Sizes: 5/8 in OD copper discharge, 5/8 in OD oil return, 1/4 in OD oil supply, 1/4 in OD unloader, 5/8 in ID inlet cavity to air cleaner, 1/2 in OD coolant
• Oil Drain: Internal at flange
Applications:
Used on Detroit Diesel 0° tilt engine applications requiring a Bendix Tu-Flo 501 compressor with flange mounting, gear drive, left-side inlet, left-side outlet, flange discharge, and internal oil drain at the flange. Match by OE number, tilt configuration, port orientation, drive setup, and flange mount before installation.
CROSS-REFERENCE(S):
04625286623X, BX286623X, BEN286623X, EL16051, EL16051X, EL13051, EL13051X, 1093189, 15608210, 3095685, 700010036, 745-286619, BAN286619, BEN286619, BW286619, BX286619, TWDBEN286619, ZAC286619
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify Detroit Diesel 0° tilt fitment, flange mount, gear-drive setup, left-side inlet, and left-side outlet before installation
✔ Confirm port orientation viewed from the rear of the compressor
✔ Match flange discharge and internal flange oil drain to the original compressor configuration
✔ Use installation gasket kit as required during installation
✔ Typical flange nut torque: 80–100 ft-lb
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
