Description
286623X - TF-501 DETROIT AIR BRAKE COMPRESSOR - REMANUFACTURED
PART NUMBER(S):
Fleet Products: 286623X (Remanufactured) | Replaces OE: Bendix: 106240, 106290, 106374, 109866, 286538, 286619, 286623
DESCRIPTION:
Model: Bendix Tu-Flo 501 (TF-501) Detroit Air Brake Compressor
Vehicles: Detroit Diesel Series 60 0° tilt engine applications in heavy-duty trucks and highway tractors
• Mounting: Flange mount
• Drive Type: Gear drive, non-thru
• Cooling: Water / air cooled
• Air Inlet Location: Left, viewed from rear
• Air Outlet Location: Left, viewed from rear
• Discharge Type: Top / flange
• Head Rotation: Right
• Block Rotation: Left
• Oil Drain: Internal at flange
• Turbochargeable: Yes
• No. of Cylinders: 2
• Bore x Stroke: 2.625 in x 1.50 in
• Displacement @ 1250 RPM: 12 CFM
• Displacement Per Revolution: 16.5 cu in
• Max RPM: 3000 naturally aspirated
• HP @ 3000 RPM / 100 PSI: 4.9 HP
• Minimum Coolant Flow @ Max RPM: 2.5 GPM
• Minimum Unload Pressure: 60 PSI
• Temperature Range: 250°F inlet / 400°F discharge
• Line Sizes: 5/8 in OD copper discharge, 5/8 in OD oil return, 1/4 in OD oil supply, 1/4 in OD unloader, 5/8 in ID inlet cavity to air cleaner, 1/2 in OD coolant
Applications:
Used on Detroit Diesel Series 60 0° tilt engine applications requiring a TF-501 compressor with flange mounting, gear drive, non-thru configuration, left-side ports, and internal flange oil drain. Match by OE number, tilt configuration, port orientation, head/block rotation, and oil feed/drain setup before installation.
CROSS-REFERENCE(S):
04625286623X, BX286623X, BEN286623X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify Detroit Diesel Series 60 0° tilt fitment, flange mounting, gear-drive setup, and non-thru configuration before installation
✔ Confirm left-side inlet and left-side outlet orientation viewed from the rear of the compressor
✔ Confirm head rotation right and block rotation left before installation
✔ Connect oil feed and internal flange oil drain correctly before startup
✔ Use installation gaskets and do not reuse old sealing surfaces
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
