Description
TY060 - 60" STEEL BRAIDED LINE - AIR COMPRESSOR DISCHARGE LINE
PART NUMBER(S):
Fleet Products: TY060 (New) | Replaces OE: Automann 177.10160, 177.1016, 17710160, 1771016, AM17710160 | Tectran 19DSW360, TEC19DSW360 | Freightliner A12-11593-060 | Kenworth K342-181-60, KWK34218160, HE1656 | Genuine Newstar KW-K342-181-60, S-25916, S25916 | World American A52510X60-AA | Other 157-10SAE60, 462260, 15560, ANCT-DC60, 41033-60
DESCRIPTION:
Model: 60" steel braided compressor discharge line
Vehicles: Used for compressor discharge on heavy-duty trucks and trailers; connects air compressor to air reservoir and brake/air systems
• Application: Universal compressor discharge hose assembly
• Hose Type: Compressor discharge
• Hose Length: 60"
• Hose ID: 1/2"
• Hose OD: 0.65" / 5/8" reference
• Nominal Tube Size: 5/8"
• Inner Tube: Smooth, antistatic, extruded PTFE
• Outer Cover: Type 304 stainless steel wire braid
• Reinforcement: One high-tensile Type 304 stainless steel wire braid
• Ends: Female SAE 45° flare swivel fittings
• Fitting (A): #10, 7/8"-14 SAE female
• Fitting (B): #10, 7/8"-14 SAE female
• Thread Size: -10
• Thread Dimensions: 7/8"-14
• Working Pressure: 1500 psi
• Minimum Burst Pressure: 6000 psi
• Minimum Bend Radius: 6.5"
• SAE Specification: SAE 100R14
• Temperature Range: -60°C to 260°C
• Temperature Range Reference: -76°F to 500°F
CROSS-REFERENCE(S):
TY060, 157-10SAE60, 462260, 17710160, 1771016, 19DSW360, 15560, TEC19DSW360, A12-11593-060, K342-181-60, HE1656, AM17710160, 177.10160, KWK34218160, A52510X60-AA, ANCT-DC60, 41033-60, KW-K342-181-60, S-25916, S25916, 177.1016
A cross-reference listing means this part is a suitable replacement for the part numbers listed.
IMPORTANT INSTALLATION NOTES:
✔ Connects air compressor to air reservoir and air brake system discharge circuits.
✔ Confirm 60" hose length, 1/2" hose ID, 7/8"-14 thread size and female SAE 45° flare ends before installation.
✔ Avoid kinks, twists and sharp bends; maintain at least the 6.5" minimum bend radius.
✔ Route away from abrasion points, sharp edges and excessive exhaust heat where possible.
✔ Use only within the listed working pressure and temperature range for the application.
✔ Check fittings for leaks after installation and confirm proper air system build-up before returning the vehicle to service.
Warranty Information
