Description
PREMIUM AIR DISC BRAKE PADS – MERITOR ELSA-2
PART NUMBER(S):
Fleet Products: PE1310HK (New) | Replaces OE: Meritor 68324558, 68324957, 68325344, 68325346, 68325901, 68326015, 68324558NZP, MDP5060, MDP5097, MMD1310AF | FMSI D1310, 8425-D1310, D1310-8425 | Automann 9190.1, ATD-1310HD, ATD1310HD, 141.D1310FS | A-Line ALP1310-KZx | WVA 29131, 29156 | Abex ADB1310FE, ADB1310AFE, ABX-1310 | Haldex MPBD1310HD, MPBD1310CV, MPBD1310XT | Frasle ESD1310 | Durabrake BP622 | Fettic CFD-F257, CFDF257 | Textar 2913103, 2913111 | Marathon CBP-HDX01 | Van Hool N508206051, N508206052 | Volvo 20976509, 21309468, 85107768 | MAN 81508205072, 81508205073, 81508205080, 81508206041, 81508206051 | Rockwell 15227419T
DESCRIPTION:
Model: Meritor Elsa-2
Vehicles: MCI, Meritor, Neoplan, Prevost, SAF Holland/Neway, Volvo, Wabco, Van Hool CX45, TX16, TDX27, TD925, Volvo 9700, 9900, B11R, FH16, FMX 2015–present, MAN, Renault, Mercedes-Benz, DAF coaches using Meritor Elsa-2 calipers, European commercial buses
• Length: 250 mm
• Width: 118 mm
• Thickness: 30 mm
• Replace at: 25 mm
• Sintered metal
• 9 mm galvanized steel backplate
• Friction Coefficient: 0.40–0.50
• Temp: -40°C to +650°C
• Rotor: 440 mm OD (45 mm new / 36.5 mm min)
Applications:
Designed for heavy-duty trucks and buses equipped with Meritor Elsa-2 air disc brake calipers. These pads deliver OE-level performance and thermal stability under severe-duty braking. Fitment confirmed for European commercial vehicles including Volvo and Van Hool, among others. Not compatible with Knorr SB7, Bendix ADB22X, or Haldex RDS systems.
CROSS-REFERENCE(S):
ADD1310FE, SB-1310, FP-D1310HK, UP901310, RDB1310, FIP-1310, R1310, PHD-1310, K1310
A cross-reference listing means this part may be a compatible replacement for these part numbers based on OEM or distributor data.
IMPORTANT INSTALLATION NOTES:
✔ Always install in complete axle sets for even wear and optimal braking
✔ Do not install pads on contaminated or damaged rotors
✔ Use new pad retention springs (Meritor P/N 430009) during installation
✔ Resurface rotor if DTV exceeds 0.05 mm
✔ Torque caliper bolts to 210 Nm ±5%, pad spring bolts to 35 Nm
✔ Perform bedding-in: 10 stops from 30 mph at 0.4g deceleration
✔ Inspect guide pins for play or misalignment if pad wear is uneven
✔ Confirm caliper is Meritor Elsa-2 before installation
Warranty Information
