Description
GUIDE PIN KIT – WABCO PAN19 / PAN22 CALIPERS
PART NUMBER(S):
Fleet Products: FPK30123 (New) | Replaces OE: Automann 100.A1438.12 | Hendrickson D-32676-15, D3267615, S-32676-4 | WABCO 12999738VT, 6402259212, WABPAN192204, 12 999 776 | DAF 1505890 | Liebherr 10326485 | SAF 3434382700, 3434382701, 3 434 3828 00, 434382800 | Scania 2093080 | Schmitz Cargobull 1020777, SCB1068119 | Schwarzmüller 46780 | Volvo WA12999738VT, 85108166
DESCRIPTION:
Model: WABCO PAN19 / PAN22
Vehicles: IMT and Hendrickson axles with PAN19 or PAN22 calipers (Utility, Great Dane, Wabash trailers)
• Kit Type: Guide Pin Repair Kit
• Caliper Types: WABCO PAN19.1, PAN19.2, PAN22.1, PAN22.5
• Compatible Calipers:
– FP40195037WCX (PAN19, IMT Carrier, LH)
– FP40195038WCX (PAN19, IMT Carrier, RH)
– FP40225015WC-G (PAN22, IMT Carrier, LH)
– FP40225016WC-G (PAN22, IMT Carrier, RH)
– FP40225015WCX (PAN22, IMT Carrier, LH)
– FP40225016WCX (PAN22, IMT Carrier, RH)
– FP6402250800WC-G (PAN22, Hendrickson Carrier, LH)
– FP6402250810WC-G (PAN22, Hendrickson Carrier, RH)
– FP6402250800WCX (PAN22, Hendrickson Carrier, LH)
– FP6402250810WCX (PAN22, Hendrickson Carrier, RH)
• Mounting Hardware Contents:
– Guide Pins: Ø37.7 mm × 76 mm, Ø38 mm × 118 mm
– Bolts: M16 × 1.5 × 80 mm, M16 × 1.5 × 120 mm
– Bushings: 3× Teflon bushings (Ø42 × Ø38 × 30 mm)
– Seals: 2× guide pin gaiters, 1× bolt dust excluder, 2× steel caps (Ø42.1 × 17/29 mm)
– Accessories: 2× Ø44.5 mm rings, 1× plug, grease
• Materials: OEM-grade steel, rubber, Teflon
CROSS-REFERENCE(S):
30123CE, 0810 30123, BTW30123, 1628065, 5001 866 626, 6500700, CWSK.6, 40 195.1, 40 225.1, 12999776, 659742-2, 6597422, 1440505, 5501858722
A cross-reference listing means this part may be a compatible replacement for these part numbers
IMPORTANT INSTALLATION NOTES:
✔ Use only on WABCO PAN19 and PAN22 trailer calipers
✔ Replace both guide pins and bushings during service for optimal performance
✔ Clean and prep the caliper mounting surface; ensure it is flat and free of corrosion.
✔ Lubricate all moving components with included grease
✔ Mount components and torque fasteners to OE specifications
✔ Turn the adjuster COUNTER-CLOCKWISE until the brake pads just contact the rotor (do not over-tighten).
✔ Then turn CLOCKWISE 1/4 turn to set clearance.
✔ Confirm system air pressure is between 100–120 psi.
✔ Block and secure wheels to prevent any movement.
✔ Depress the emergency brake release button on the dash to release spring brakes.
✔ Only after the wheels are secure and spring brakes are released should you proceed with caliper adjustment.
Warranty Information
