Description
5016389X BA-922 JOHN DEERE POWERTECH AIR COMPRESSOR – REMANUFACTURED
PART NUMBER(S):
Fleet Products: 5016389X (Remanufactured), 5016389 (New) | Replaces OE: Bendix: 5016044, 5016380, 5016381, 5016389, 5019611, 802158, K049684, K055603 | John Deere: RE528181, RE528960, RE528961, RE529515, RE537275
DESCRIPTION:
Model: Bendix BA-922 John Deere PowerTech Air Compressor
Vehicles: John Deere Tier 3 PowerTech+ 4.5L, 6.8L, 9.0L and 13.5L engine applications including 4045CI550, 4045CI551, 4045HF280, 4045HF285, 4045HF485, 4045HFC04, 4045HFC06, 4045HFC09, 4045HFC92, 4045HFC93, 4045HFG85, 4045HI550, 4045TF280, 4045TF285, 4045TF290, 6068HF285, 6068HF485, 6068HFG85, 6090HF485 and 6135HF485
• Compressor Type: Twin-cylinder reciprocating air brake compressor
• Mounting: Flange mount
• Drive Type: Engine driven
• Configuration: Without gear
• Gear-Included Reference Configuration: 5016381X
• Cooling: Water/Air combination
• Air Inlet: Top-mounted
• Air Outlet: Top-mounted
• Discharge Type: Threaded
• Cylinders: 2
• Bore × Stroke: 3.622 in × 2.125 in
• Rated Displacement: 31.7 CFM @ 1250 RPM
• Air Flow: 25.2 CFM @ 1800 RPM / 120 PSI; 38.4 CFM @ 3000 RPM / 120 PSI
• Maximum Speed: 3000 RPM
• Power Requirement: 8.73 HP loaded / 1.96 HP unloaded @ 1800 RPM / 120 PSIG
• Minimum Coolant Flow: 2.0 GPM @ maximum RPM
• Minimum Oil Pressure: 15 PSI
• Minimum Governor Cut-Out Pressure: 120 PSI
• Oil Supply Line: 3/16 in I.D.
• Unloader Line: 3/16 in I.D.
• Temperature Range: 170°F inlet / 350°F discharge
• Air Inlet Port: 1 3/16-12 UN or M27 × 2
• Air Discharge Port: 7/8-14 UNF or M22 × 1.5
• Water Ports: 3/4-16 UNF or M18 × 1.5
• Unloader Port: 1/8-27 NPT or M10 × 1.5
• Safety Valve Port: M16 × 1.5 or 3/4-16 UNF
• Oil Port: 7/16-20 UNF or M12 × 1.5
• Includes: Installation gaskets
CROSS-REFERENCE(S):
5011624, 5011625, 5013063, 5013070, 5013071, 5019460, 5019461, 5019462, 801594, RE528181, 5019460X, 5019461X, 5019462X, 5019611X, 745-5016389X, 7455016389X, 703616AT, BW5016389X, BW801594, BWK055603, BX5016389X, MID110205, SEA110205, SLC110205
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Prime the oil supply line before initial startup
✔ Verify all air, coolant and oil connections are properly sealed
✔ Drain all air reservoirs before servicing the air brake system
✔ Inspect compressor mounting hardware and fittings before operation
✔ Confirm drive gear transfer or gear requirement before installation
✔ Check connected air, oil and coolant lines before returning the vehicle to service
✔ Torque cylinder head fasteners to 265–292 in-lb
✔ Torque governor adapter fasteners to 195–213 in-lb
✔ Torque rear end cover fasteners to 195–213 in-lb
✔ Torque crankshaft nut (M20 × 2.5) to 1858–2567 in-lb (210–290 Nm)
✔ Torque inlet port fitting to 575–637 in-lb
✔ Torque discharge port fitting to 460–504 in-lb
✔ Torque water port fitting to 319–345 in-lb
✔ Torque safety valve port fitting to 230–257 in-lb
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
