Description
DF-596 DETROIT DIESEL "CERTIFIED REMANUFACTURED" AIR BRAKE COMPRESSOR
PART NUMBER(S):
Fleet Products: 5005875X (Remanufactured) 5005875 (NEW)| Replaces OE: Bendix 5003879, 5004412, 5004416, 5004417, 5005875, 5005920, 5006407, 5008303, 5011086, 800595, 800686 | Detroit Diesel 23514143, 23515565, 23515565R, 23524143, 23524143R, DDE E23524143, DDE R23524143, DDEE23524143, DDER23524143, P23524143, R23524143 | Haldex 704067AT, 705795AT | Meritor R9555005875X | PACCAR 5005875XM1D | Mack 5396-5005875X, 745-5005875X, 745-800595, 7455005875X, 745800595 | Automann 170.AC5005875
DESCRIPTION:
Model: DF-596 Detroit Twin Compressor
Vehicles: Detroit Diesel Series 60 / Series 50 12.7L, 14L, 11.1L engines on Freightliner, Western Star, and other heavy-duty platforms
Bore x Stroke: 3.465 in x 1.968 in
• Oil Supply/Unloader Line Size: 3/16 in ID
• Water In/Out/Safety Valve Port: M16 x 1.5
• Air Discharge Port: M27 x 2
• Unloader Port: M22 x 1.5
• Oil Inlet Port: M12 x 1.5
• Air Inlet/Outlet: Top
• Mounting: Flange mount
• Drive: Engine-driven gear drive
• Cooling: Water-cooled head, air-cooled crankcase
• Cylinders: 2, 608 CC
• Output: 27 CFM at 1250 RPM; 23 CFM at 2100 RPM / 120 PSI
• Maximum RPM: 3000
• Minimum Coolant Flow: 2.5 GPM
• Loaded Power: 7.5 HP at 1800 RPM / 120 PSI
• Unloaded Power: 0.9 HP at 1800 RPM
• Maximum Temperature: 250°F inlet / 400°F discharge
• Minimum Oil Pressure: 15 PSI at idle and maximum speed
• Minimum Governor Cutout: 130 PSI
• Includes: Installation gaskets
CROSS-REFERENCE(S):
00716800595, 046255005875X, 1628593, 1651795875, 20429339, 5005875B1, 5005875BXR, 5005875R, 5005875RX, 5005875X, 5005875XBXR, 5005875X-MD, 636-01-1000, 636.01.1000, 636011000, 800595BXW, 800868, 8113264, 85000064, BAR5005875, BDR5005875X, BEN5005875X, BEN800595, BW R5005875, BW R5005875/CR, BW5005875, BW5005875X, BW800595, BWR5005875, BX5005875X, BX800595, BXW5005875X, EX5005875X, hdx5005875x, HVG5005875X, II37369, K000236, LP4974, LP4977, ZAC800595, ZBX800595, ZZ5005875X
A cross-reference listing means this part should be a suitable replacement for the part numbers listed.
IMPORTANT INSTALLATION NOTES:
✔ New installation gaskets included.
✔ Inspect and flush all air and coolant lines before installation.
✔ Do not reuse contaminated lines, fittings, or seals.
✔ Follow Detroit Diesel OEM torque and mounting procedures.
✔ Verify compressor drive gear alignment before startup.
✔ Torque 13 mm head bolts: 265–292 in-lb.
✔ Torque 10 mm valve bolts: 101–111 in-lb.
✔ Torque crankshaft nut: 1200–1440 in-lb.
✔ Torque M12 fasteners: 222 in-lb.
✔ Torque M16 fasteners: 386 in-lb.
✔ Torque M22 fasteners: 531 in-lb.
✔ Torque M27 fasteners: 792 in-lb.
Warranty Information
