3709815C94 | Yoosung Twin Side Mount Compressor (MaxxForce 13 Navistar Engine) K048595, 3624500C92, K237295SC, 51066090/7138

3709815C94 - YOO SUNG TWIN SIDE-MOUNT AIR BRAKE COMPRESSOR – NEW

PART NUMBER(S):

Fleet Products: 3709815C94 (New) | Replaces OE: Navistar / International: 3709815C91, 3709815C92, 3709815C93, 3709815C94 | Bendix: K048595, K237295SC | Yoo Sung: 51066090/7138

DESCRIPTION:

Model: Yoo Sung Twin Side-Mount Air Brake Compressor
Vehicles: International / Navistar MaxxForce 11 and MaxxForce 13 engine applications, including ProStar and 2010 EPA and newer MaxxForce 11/13/N13 platforms equipped with Yoo Sung dual-cylinder compressor configuration

• 720 CC twin-cylinder clutched air compressor
• Mounting: Side mount / direct-to-engine-block mounting
• Bore: 92 mm
• Stroke: 54 mm
• Rated Displacement: 31.6 CFM at 1250 RPM
• Flow: 30.3 CFM at 1800 RPM / 120 PSI, 45.3 CFM at 3000 RPM / 120 PSI
• Maximum System Pressure: 150 PSI
• Minimum Oil Pressure: 10 PSI
• Minimum Coolant Flow: 2.64 GPM
• Cooling: Water-cooled cylinder head and water-cooled crankcase
• Discharge Port: 3/4" NPT
• Air Inlet Configuration: Naturally aspirated
• Power Steering Pump Interface: Yes
• Clutch Supply Line: Yes

Applications:

Used on International / Navistar trucks equipped with MaxxForce 11, MaxxForce 13, and related N13 engine platforms where OE 3709815C94 Yoo Sung twin side-mount compressor configuration is required. This compressor supplies compressed air for service brake and auxiliary pneumatic systems and should be matched by OE number, side-mount layout, clutch supply configuration, power steering pump interface, coolant fitting layout, and intake/discharge routing before installation.

CROSS-REFERENCE(S):

1650430001, 1654720004, 165-043-0001, 165-472-0004, 3709920C91, 3709920C92, 3624500C91, 3624500C92, 3624500C94, K044642, BXK044642SC1, K237295SC, K048297, K015965, K088948N00, K088948N04, LK4928, 51541007024, 51541007114, 51541007196, 51541007227, 51541007248, 3709815C94G

A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.

IMPORTANT INSTALLATION NOTES:

✔ Verify OE 3709815C94 / MaxxForce 11 or 13 fitment, side-mount layout, clutch supply line, and power steering pump interface before installation
✔ Transfer or replace required coolant supply fitting, coolant return fitting, clutch supply fitting, and power steering pump sealing components as required
✔ Inspect or replace the compressor discharge line and confirm the air inlet/outlet routing is clean, unrestricted, and correctly aligned
✔ Use proper sealant and new seals / O-rings on compressor-to-engine mounting surfaces and coolant fittings
✔ Suggested torque: compressor mounting bolts 41–50 ft-lb; lifting-eye-bracket bolts 66 ft-lb; follow OEM torque procedures for all transferred fittings and mounting hardware