Description
3558060X - SS296BE CUMMINS AIR BRAKE COMPRESSOR - REMANUFACTURED
PART NUMBER(S):
Fleet Products: 3558060X (Remanufactured) | Replaces OE: Holset / Cummins: 3558060, 3558097, 3558097X
DESCRIPTION:
Model: Holset SS296BE Super Single Cummins Air Brake Compressor
Vehicles: Cummins B-Series engine applications requiring 35° tilt and thru-drive power steering pump configuration
• Compressor Family: SS Super Single
• Design: Single-cylinder air brake compressor
• Cooling Method: Water cooled
• Air Inlet Location: Rear / left, verify by application
• Air Outlet Location: Front / rear, verify by application
• CFM Output: 13.2 CFM @ 1250 RPM
• Mounting: Flange mount
• Unloader Type: E-type
• Drive Type: Engine driven
• Drive Configuration: Thru-drive for power steering pump
• Spline Shaft: 11-tooth
• Tilt Angle: 35°
• Crankshaft Thread: M20 x 1.5
• Max Operating Pressure: 145 PSI
• Configuration Note: E-unloaded version of 3049186
• Includes: Installation gaskets
Applications:
Used on Cummins B-Series engine applications requiring a Holset SS296BE compressor with 35° tilt, flange mounting, E-type unloader, 11-tooth thru-drive shaft, and 13.2 CFM output. Match by OE number, B-Series engine fitment, tilt angle, port orientation, thru-drive setup, and unloader configuration before installation.
CROSS-REFERENCE(S):
3049186, 3049186X, 3049186RX, 3558060, 3558060X, 3558060RX, 3558065, 3558065X, 3558065RX, 3558097, 3558097X, 3558097RX, 3558204, 3558204X, 3558204RX, 3558206, 3558206X, 3558206RX, 3045670, 3558790
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify Cummins B-Series fitment, SS296BE model, 35° tilt, flange mount, and E-type unloader configuration before installation
✔ Confirm 11-tooth thru-drive shaft and power steering pump alignment before startup
✔ Match rear / left inlet and front / rear outlet orientation against the original compressor
✔ Confirm crankshaft thread M20 x 1.5 and max operating pressure requirement of 145 PSI
✔ Use installation gaskets and verify air, oil, and coolant lines are clean before installation
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
