Description
289350X TF-700 PULLEY DRIVE AIR BRAKE COMPRESSOR REMANUFACTURED
PART NUMBER(S):
Fleet Products: 289350X (Remanufactured), Replacable with 280540 (TF-600), 228140 (TF-500) | Replaces OE: Bendix: 101255, 101256, 102038, 102041, 102631, 102965, 280540, 280605, 280613, 280797, 280852, 281743, 289238, 289350, 289865, 289936, 9L3613 | International Harvester Service: 97193R91, 143018R91, 149628R91, 179022R91, 295435C91, 398568C91, 398568C92, 540514-C91, 540514-C93, 861448R91, 861448R92, 861448R93, 990007C91, 990178C91, 990210C91, 997065R91
DESCRIPTION:
Model: Bendix Tu-Flo 700 Pulley Drive Air Brake Compressor
Vehicles: International Harvester Transtar, Caterpillar 3208 engine applications
• Cooling: Water cooled
• Mounting: 4-hole base mount
• Drive: Pulley drive
• Air inlet location: Left
• Air outlet location: Left or top
• Discharge type: Top or left
• Cylinders: 2
• Bore × Stroke: 2.75 in × 1.81 in
• Rated displacement: 15.5 CFM @ 1250 RPM
• Maximum speed: 3000 RPM
• Minimum coolant flow: 2.5 GPM
• Minimum unload pressure: 60 PSI
• Maximum inlet temperature: 250°F
• Maximum discharge temperature: 400°F
• Discharge line: 5/8 in OD copper
• Oil return line: 5/8 in OD
• Oil supply line: 1/4 in OD
• Unloader line: 1/4 in OD
• Coolant line: 1/2 in OD
Applications:
Designed for pulley-driven air brake systems on International Harvester Transtar trucks equipped with Caterpillar 3208 engines. This Bendix Tu-Flo 700 compressor uses a 4-hole base mount and provides compressed air for heavy-duty brake and auxiliary pneumatic systems. EL16060 and EL16060X compressors may also be used for this application.
CROSS-REFERENCE(S):
101255, 101256, 102038, 102041, 102631, 102965, 280540, 280605, 280613, 280797, 280852, 281743, 289238, 289350, 289865, 289936, 9L3613, 97193R91, 143018R91, 149628R91, 179022R91, 295435C91, 398568C91, 398568C92, 540514-C91, 540514-C93, 861448R91, 861448R92, 861448R93, 990007C91, 990178C91, 990210C91, 997065R91, EL16060, EL16060X, 745289350X, 04625289350, 10130467
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify pulley alignment and belt alignment before installation
✔ Confirm the 4-hole base mounting pattern matches the original compressor
✔ Replace all mounting gaskets and seals during installation
✔ Ensure coolant, oil, and air passages are clean and unrestricted
✔ Prime the compressor with clean engine oil before initial startup
✔ Check pulley clearance and belt tension after installation
✔ Verify proper operation and inspect for air, oil, and coolant leaks
✔ Torque all mounting hardware and fittings to OEM specifications
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
