Description
286591X - TF-501 BASE MOUNT PULLEY DRIVE AIR BRAKE COMPRESSOR - REMANUFACTURED
PART NUMBER(S):
Fleet Products: 286591X (Remanufactured) | Replaces OE: Bendix: 101904, 101936, 102001, 102091, 102092, 102544, 103071, 103072, 103890, 104032, 104034, 102822, 286529, 286560, 286591, 289015, 289751
DESCRIPTION:
Model: Bendix Tu-Flo 501 (TF-501) Base Mount Pulley Drive Air Brake Compressor
Vehicles: Ford truck and commercial platform applications requiring TF-501 base-mount pulley-drive compressor fitment
• Mounting Style: Base mount, Style B, 6-hole
• Cooling: Water and air cooled
• Air Inlet Location: Right, viewed from rear
• Air Outlet Location: Right, viewed from rear
• Discharge Type: Threaded flange
• Drive Type: Pulley drive
• No. of Cylinders: 2
• Bore x Stroke: 2.625 in x 1.50 in
• Displacement @ 1250 RPM: 12 CFM
• Displacement Per Revolution: 16.5 cu in
• Max RPM: 3000 naturally aspirated
• HP @ 3000 RPM / 100 PSI: 4.9 HP
• Minimum Coolant Flow @ Max RPM: 2.5 GPM
• Minimum Unload Pressure: 60 PSI
• Temperature Range: 250°F inlet / 400°F discharge
• Line Sizes: 5/8 in OD copper discharge, 5/8 in OD oil return, 1/4 in OD oil supply, 1/4 in OD unloader, 5/8 in ID inlet cavity to air cleaner, 1/2 in OD coolant
Applications:
Used on Ford truck and commercial platform applications requiring a Bendix Tu-Flo 501 compressor with Style B 6-hole base mounting, pulley-drive configuration, right-side inlet, right-side outlet, and threaded flange discharge. This compressor supplies air for service brake and auxiliary pneumatic systems and should be matched by OE number, base mount style, pulley alignment, port orientation, and discharge configuration before installation.
CROSS-REFERENCE(S):
286592
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify Style B 6-hole base mount, pulley-drive setup, right-side inlet, and right-side outlet before installation
✔ Confirm port orientation viewed from the rear of the compressor
✔ Match threaded flange discharge to the existing air line configuration
✔ Ensure pulley and drive component alignment before startup
✔ Typical flange nut torque: 80–100 ft-lb
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
