Description
286565X - TF-501 SLANT MOUNT LEFT PULLEY DRIVE AIR BRAKE COMPRESSOR - REMANUFACTURED
PART NUMBER(S):
Fleet Products: 286565X (Remanufactured) | Replaces OE: Bendix: 104854, 281469, 286009, 286010, 286556, 286565, 288087
DESCRIPTION:
Model: Bendix Tu-Flo 501 (TF-501) Slant Mount Left Pulley Drive Air Brake Compressor
Vehicles: White heavy-duty truck, semi truck, and commercial truck applications requiring TF-501 slant-left pulley-drive compressor fitment
• Mounting Style: Slant mount, left, pulley drive
• Cooling: Water cooled
• Air Inlet Location: Right, viewed from rear
• Air Outlet Location: Right, viewed from rear
• Discharge Type: Flange
• Drain Location: Front drain
• Drive Type: Pulley drive
• No. of Cylinders: 2
• Bore x Stroke: 2.625 in x 1.50 in
• Displacement @ 1250 RPM: 12 CFM
• Displacement Per Revolution: 16.5 cu in
• Max RPM: 3000 naturally aspirated
• HP @ 3000 RPM / 100 PSI: 4.9 HP
• Minimum Coolant Flow @ Max RPM: 2.5 GPM
• Minimum Unload Pressure: 60 PSI
• Temperature Range: 250°F inlet / 400°F discharge
• Line Sizes: 5/8 in OD copper discharge, 5/8 in OD oil return, 1/4 in OD oil supply, 1/4 in OD unloader, 5/8 in ID inlet cavity to air cleaner, 1/2 in OD coolant
Applications:
Used on White heavy-duty truck and commercial truck applications requiring a Bendix Tu-Flo 501 compressor with slant-left mounting, pulley-drive configuration, right-side inlet, right-side outlet, flange discharge, and front drain. This compressor supplies air for service brake and auxiliary pneumatic systems and should be matched by OE number, mount angle, pulley alignment, drain location, and port orientation before installation.
CROSS-REFERENCE(S):
286565B1, H286565X, MID286565X, R286565X, R955286565X, BX286565X, BX288087, EBN286565X, BW286565X, 281602X, 283662X, BXR286565X, BXX286565, MI286565X, X286565, P286565, R288087
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify slant-left mounting, pulley-drive setup, right-side inlet, right-side outlet, and flange discharge before installation
✔ Confirm port orientation viewed from the rear of the compressor
✔ Confirm front drain location and clearance before installation
✔ Ensure pulley and drive component alignment before startup
✔ Match discharge flange to the existing air brake line setup
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
