Description
11995X MASTER CYLINDER
PART NUMBER(S):
Fleet Products: 11995X (Remanufactured) | Replaces OE: Bendix: 2236194, 11995 | Ford: E4HZ2140B | Delco: 18030554, 18M312 | NAPA: 39574 | Raybestos: MC39574, MC507690 | Wagner: F110980 | Centric: 130.79021 | Euclid: E7797, E-7797 | Autospecialty: M89021
DESCRIPTION:
Model: Brake Master Cylinder – 2.00" Bore
Vehicles: Ford C/C700/C7000/C800/C8000, FT800/FT900, F-800, L/LNT/LTL/LTS 800-9000 Series (1983–1999)
• Bore Diameter: 2.000" (50.8 mm), straight bore
• Material: Cast iron housing
• Reservoir: Single removable plastic reservoir included
• Outlets: Two ports; rear 9/16"-18 inverted flare, front 1/2"-20 inverted flare
• Mounting: Four-hole mounting pattern
• Casting Number: 2230605
Applications: This 2.00" bore brake master cylinder restores hydraulic brake pressure in medium-duty Ford C-Series, F-Series, FT-Series, and L-Series trucks equipped with hydraulic or air-over-hydraulic brake systems. It provides a direct replacement for the original master cylinder while maintaining the correct port configuration and mounting pattern.
CROSS-REFERENCE(S):
M39574, MCA630276, 30962, M900518, MC110980, 65-M39574, 230279021, 2302-79021, E150273, E13584026, E135-84-026, 100-4363, 355-54289, 10-8035, 35554289, 10028278, 8413500080
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Bench-bleed the master cylinder before installation to remove trapped internal air.
✔ Verify outlet thread sizes and brake line routing before connecting the vehicle plumbing.
✔ Use only fresh DOT 3 or DOT 4 brake fluid as specified by the vehicle manufacturer.
✔ Pressure-bleed the complete brake system after installation and inspect all hydraulic connections for leaks.
✔ Confirm pushrod adjustment and pedal free play according to Ford service specifications before returning the vehicle to service.
Warranty Information
