Description
109868X – TF-750 DETROIT SERIES 60 AIR BRAKE COMPRESSOR – REMANUFACTURED
PART NUMBER(S):
Fleet Products: 109868X (Remanufactured) | Replaces OE: Bendix: 109868 | Detroit Diesel: 23505235, R3505235
DESCRIPTION:
Model: Bendix Tu-Flo 750 Detroit Air Brake Compressor
Vehicles: Detroit Diesel Series 60 engine applications
• Cooling: Water and air cooled
• Drive Type: Gear driven, thru-drive
• Mounting: Flange mount
• Air Inlet Location: Left side, viewed from rear
• Air Outlet Location: Top or left
• No. of Cylinders: 2
• Bore x Stroke: 2.78 in x 1.87 in
• Rated Displacement: 16.5 CFM @ 1250 RPM
• Maximum Speed: 2400 RPM
• Power Requirement: 3.2 HP @ 1250 RPM / 120 PSIG
• Minimum Coolant Flow: 2.5 GPM
• Minimum Unload Pressure: 60 PSIG
• Oil Pressure: 15 PSIG idle and governed
• Temperature Range: 250°F inlet / 400°F discharge
• Port Sizes: 1/2-14 NPT water inlet/outlet, 1/2-14 NPT air discharge, 1/8-27 NPT governor, 1/8-27 NPT oil inlet
• Minimum Line Sizes: 1/2 in ID discharge, 3/8 in ID coolant, 3/16 in ID oil supply, 1/2 in ID oil return, 5/8 in ID air inlet, 3/16 in ID unloader
Applications:
Used on Detroit Diesel Series 60 engine applications requiring a Bendix Tu-Flo 750 compressor with gear-driven, thru-drive, flange-mounted configuration. The compressor supplies air for heavy-duty service brake and auxiliary pneumatic systems and is typically replaced due to reduced air delivery, oil carryover, overheating, or internal wear.
CROSS-REFERENCE(S):
107784, 107623, EL16053, EL16053X, 107623X, 107813X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify thru-drive configuration, flange mounting, and top/left discharge port orientation before installation
✔ Prime the compressor with clean engine oil before initial startup
✔ Ensure coolant, oil, and air lines are clean and free of restrictions before installation
✔ Replace all mounting gaskets and seals, and maintain minimum 2.5 GPM coolant flow
✔ Check for air, oil, and coolant leaks after operating pressure is reached, and torque mounting hardware and fittings to OEM specifications
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
