Description
107510X TF-750 MACK AIR BRAKE COMPRESSOR REMANUFACTURED
PART NUMBER(S):
Fleet Products: 107510X (Remanufactured) | Replaces OE: Bendix: 107004, 107510, 107780, 065201, 65201, 800274, 5002868 | Mack: 303GB5103 | Meritor: R955107510X | Automann: 170.AC107510
DESCRIPTION:
Model: TF-750 Mack Air Brake Compressor
Vehicles: Mack heavy-duty trucks, semi trucks, 18 wheelers, commercial trucks
• Mounting: Engine drive, flange mount
• Compressor type: Twin-cylinder air brake compressor
• Cooling: Water and air cooled
• Equipped for: Power steering
• Air inlet: Right side
• Air outlet: Right side or top discharge
• Discharge type: Optional top or right discharge
• Cylinder head: Iron casting
• Cylinder head position: Can be installed in two positions, 180 degrees apart
• Governor mounting: Front and rear cylinder head mounting surfaces
• Water ports: Three coolant ports
• Cylinders: 2
• Bore x stroke: 2.78 in x 1.87 in
• Flow at 1250 RPM: 16.5 CFM
• Maximum RPM: 2400
• Horsepower at 1250 RPM / 120 PSIG: 3.2 HP
• Minimum coolant flow at max RPM: 2.5 gpm
• Minimum unload pressure: 60 PSIG
• Oil pressure: 15 PSIG at idle and governed speed
• Temperature range: 250°F inlet / 400°F discharge
• Water in / out ports: 1/2-14 NPT
• Air discharge port: 1/2-14 NPT
• Governor port: 1/8-27 NPT
• Oil inlet port: 1/8-27 NPT
• Minimum discharge line size: 1/2 in ID
• Minimum coolant line size: 3/8 in ID
• Minimum oil supply line size: 3/16 in ID
• Minimum oil return line size: 1/2 in ID
• Minimum air inlet line size: 5/8 in ID
• Minimum unloader line size: 3/16 in ID
• Suggested cylinder head torque: 300–360 in-lb
• Suggested inlet / discharge fitting torque: 175–225 in-lb
• Suggested pipe plug torque: 35–270 in-lb, size dependent
• Suggested crankshaft castle nut torque: 1200–1400 in-lb / 100–120 ft-lb
• Suggested crankshaft metric nut torque: 2640–3048 in-lb / 220–254 ft-lb
Applications: This TF-750 compressor is used on Mack heavy-duty truck applications requiring a flange-mounted, twin-cylinder air brake compressor with power steering provision. It supports right-side inlet configuration with optional top or right discharge routing. Verify head orientation, discharge location, coolant ports, and power steering configuration against the original compressor before installation.
CROSS-REFERENCE(S):
65201, 107004, 5002868, 107510, H107510X, MID107510X, 065201, 107510X-BW, 107780, 303GB5103, 745-107510X, 745X107510, BW 107510X, BX107510X, EBN107510X, OR107510, R955107510X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Cylinder head can be installed in two positions, 180 degrees apart
✔ Maintain minimum 2.5 gpm coolant flow
✔ Do not exceed 2400 RPM
✔ Use correct discharge line size with continuous downward slope
✔ Ensure oil lines are primed and leak-free before startup
✔ Drain reservoirs and flush coolant and air lines before air system service
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
