Description
M2475DIO - TYPE 24 MAXIBRAKE I-SERIES UNIVERSAL SPRING BRAKE
PART NUMBER(S):
Fleet Products: M2475DIO | Replaces OE: Haldex: MA15760, MA15761, MA15773, MA15775, KSM2475KC-175NN | Caterpillar: 9K0885, 8R2488 | International: SKA814651 | Ford: D8HZ2225A | OE: 9270101126, 4HD50
DESCRIPTION:
Model: Haldex-Style Type 24 Maxibrake I-Series Universal Spring Brake
Vehicles: Off-road heavy equipment, mobile equipment, and trailers using compatible Type 24 spring brake systems
• Brake Chamber Type: Type 24 spring brake
• Effective Diaphragm Area: 24 in²
• Air Ports: Two 3/8"-18 NPTF
• Push Rod Length: 8"
• Push Rod Thread: 5/8"-18 UNF
• Mounting Stud Spacing: 4.75" center-to-center
• Mounting Stud Thread: 5/8"-11 UNC
• Maximum Operating Pressure: 125 PSI
• Power Spring: No. 75 epoxy-coated steel alloy spring
• Housing: Powder-coated all-steel construction
• Piston: Aluminum with nylon bearing
• Spring Cavity: Deep-cavity design
• Release Design: Non-caging, no manual release mechanism
• Function: Provides parking and emergency brake application when air pressure is released or lost
Applications:
Designed for compatible off-road equipment and trailer brake systems requiring a Type 24 Maxibrake with an 8" push rod, two 3/8"-18 NPTF ports, 4.75" mounting stud spacing, and a non-caging power spring configuration.
CROSS-REFERENCE(S):
KSM2460KC-800NN, KSM2475GC175NN, KSM2475GC800NN, KSM2475GCS47001, KSM2475KC800NN, KSM2475GC-175NN, KSM2475GC-800NN, KSM2475KC-800NN, KM2475, MA15775X, MA15775M1D, HDX MA15775, HMA15775X, 2475, 2475DO, 4102095, CMA15775, C-MA15775, ZZMA15775, MBIMA15775, MIDMA15775, 5396-MA15775
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Spring brake chambers contain a high-energy power spring. Installation and service must be completed by trained technicians using approved procedures.
✔ Confirm the application requires a Type 24 chamber with an 8" push rod, 5/8"-18 UNF thread, and 4.75" mounting stud spacing.
✔ Verify both air connections are 3/8"-18 NPTF and reconnect them according to the equipment pneumatic schematic.
✔ Align the push rod with the brake linkage without side loading and torque the 5/8"-11 UNC mounting hardware to the equipment manufacturer’s specifications.
✔ This is a non-caging chamber. Do not disassemble, cut, weld, or attempt to manually release the power spring housing.
Warranty Information
