Description
AIR DISC CALIPER - MERITOR (EX225H2) W/CARRIER (RH) DRIVE AXLE
PART NUMBER(S):
Fleet Products: FPKEX225H201WCX (Remanufactured) | OE: NUGEON 99B92201, MCI 04-01-1114, Meritor EX225H201XX000, Euclid E18150R20
DESCRIPTION:
Model: EX225H2 / 0°
Vehicles: MCI (2004–2017), Prevost, Transit, Fire, Refuse, Coach
• Certified Remanufactured right-hand caliper with carrier – drive axle position
• Axial mount, 0° chamber angle
• Mounting hole size M20 x 1.5
• A-B distance: 4 1/8 in.
• Carrier mounting holes: 6
• Dual-piston design – service caliper less pads and less brake chamber
• Pads: PE1311HK
• Hardware Kit: FPKEX225H
• Rotor: FPK123642
• Industry No.: E-11118X
Applications: Is this RH caliper right for your EX225H2-equipped MCI or Prevost coach? Yes—this Certified Remanufactured Meritor right-hand caliper with carrier restores full OEM braking performance on 2004–2017 transit, fire, and refuse fleets. Built to OE dimensional standards and tested for function, fit, and safety.
CROSS-REFERENCE(S):
04-01-1114, 04011114, 8235-EX225H201XX000, A225H201, ABPN42AA225H201, AMEX225H201XX000, EX225H201RW, EX225H201XX000RI, RIEX225H201XX000, ROEX225H201XX000, TDAEX225H201XX000, NUGEON 99B92201, MCI 04-01-1114, Meritor EX225H201XX000, Euclid E18150R20
A cross-reference listing means this part is a suitable replacement for the part numbers listed. Please confirm all ports and dimensions match your application before installing.
IMPORTANT INSTALLATION NOTES:
✔ Thoroughly clean all caliper bores and mounting surfaces before assembly to ensure proper fitment.
✔ Apply high-temperature brake grease to all sliding points, pins, and bushings to prevent binding and uneven pad wear.
✔ Replace guide pins, bushings, and dust excluders together to maintain balanced braking performance.
✔ Mount the caliper housing on the carrier using correct OEM bolts (M18 guide-pin bolts, M14 carrier bolts).
✔ Torque all fasteners to OEM specification; do not reuse stretched or corroded hardware.
✔ Confirm correct lever and adjuster gear alignment before fully tightening bolts.
✔ Install pads in correct orientation (inboard/outboard) and secure with the retaining bar.
✔ Manually adjust the gear-driven adjuster to seat pads near the rotor, then back off ½ turn to allow automatic adjustment.
✔ Verify smooth rotation of rotor and free movement of slide pins after assembly.
✔ Inspect rotor surface for cracks, heat checking, and proper run-out; replace if out of tolerance.
✔ Ensure caliper is installed on the correct side — EX225H201 (RH) and EX225H202 (LH).
✔ The short slide pin uses an oval bushing; the long slide pin uses round bushings — install accordingly.
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
WHY CHOOSE FLEET PRODUCTS | KBR - HEAVY DUTY TRUCK & TRAILER PARTS?
• Canadian-owned since 1985
• Trusted by fleets, mechanics, and B2B partners across North America
• Fast, Reliable Shipping Across North America
• Competitive pricing with Core Return Refunds
• Price Match Guarantee | Find a better price? We'll beat the difference by 10%!
Warranty Information
