Description
TF-750 MACK COMPRESSOR – REMAN
PART NUMBER(S):
Fleet Products: 107510X (Remanufactured) | OE: 107004, 107510, 107780, 65201, 065201, 107004, 5002868 (FLAT HEAD)
DESCRIPTION:
Model: TF-750 Mack (107510X)
Vehicles: Mack (various models), Heavy Trucks, Semi Trucks, 18 Wheelers, Commercial Trucks
• Air Inlet: Right
• Air Outlet: Right/Top (optional)
• Mounting: Engine Drive, Flange Mount
• Discharge Type: Optional Top or Right
• Cooling: Water and Air Cooled
- Cylinders: 2
- Bore x Stroke: 2.78 in x 1.87 in
- Flow @1250 RPM: 16.5 CFM
- Max RPM: 2400
- HP @1250 RPM /120 PSIG: 3.2 HP
- Min Coolant Flow @Max RPM: 2.5 gpm
- Min Unload Pressure: 60 PSIG
- Oil Pressure: 15 PSIG (idle & governed)
- Temp Range: 250°F inlet / 400°F discharge
Port Sizes (NPT)
- Water In / Out: 1/2-14
- Air Discharge: 1/2-14
- Governor: 1/8-27
- Oil Inlet: 1/8-27
Minimum Line Sizes
- Discharge: 1/2 in ID
- Coolant: 3/8 in ID
- Oil Supply: 3/16 in ID
- Oil Return: 1/2 in ID
- Air Inlet: 5/8 in ID
- Unloader: 3/16 in ID
• Equipped For: Power Steering
• Cylinder Head: Iron Casting, Can Be Installed in Two Positions (180° apart)
• Water Ports: Three Water Coolant Ports
• Governor Mounting: Surfaces at Both Front and Rear of Cylinder Head
Applications:
The TF-750 Mack Compressor (107510X) is designed for use in heavy-duty vehicles, including Mack trucks and other commercial vehicles. It is equipped with power steering capabilities and is engineered to pressurize air for air brake systems. The compressor is water and air cooled and provides high-efficiency performance, built to OEM standards for durability. EL16111X Compressors may also be used for this application.
CROSS-REFERENCE(S):
65201, 107004, 5002868, 107510, H107510X, MID107510X, 065201, 107510X-BW, 107780, 303GB5103, 745-107510X, 745X107510, BW 107510X, BX107510X, EBN107510X, OR107510, R955107510X
A cross-reference listing means this part is a suitable replacement for the part numbers listed. Please confirm all ports and dimensions match your application before installing.
IMPORTANT INSTALLATION NOTES:
✔ Cylinder head can be installed in two positions (180° apart).
- Maintain minimum 2.5 gpm coolant flow.
- Do not exceed 2400 RPM. Replace all gaskets and fittings.
- Use correct discharge line size with continuous downward slope.
- Ensure oil lines are primed and leak-free before startup.
- Drain reservoirs and flush coolant and air lines before air system service.
Suggested torque
- Cylinder Head: 300–360 in-lb
- Inlet / Discharge Fittings: 175–225 in-lb
- Pipe Plugs: 35–270 in-lb (size dependent)
- Crankshaft Nut (Castle): 1200–1400 in-lb (100–120 ft-lb)
- Crankshaft Nut (Metric): 2640–3048 in-lb (220–254 ft-lb)
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
WHY CHOOSE FLEET PRODUCTS | KBR - HEAVY DUTY TRUCK & TRAILER PARTS?
• Canadian-owned since 1985
• Trusted by fleets, mechanics, and B2B partners across North America
• Fast, Reliable Shipping Across North America
• Competitive pricing with Core Return Refunds
• Price Match Guarantee | Find a better price? We'll beat the difference by 10%!
Warranty Information
