Description
102697X - TF-501 MACK EXTENDED FLANGE AIR BRAKE COMPRESSOR - REMANUFACTURED
PART NUMBER(S):
Fleet Products: 102697X (Remanufactured) | Replaces OE: Bendix: 102658, 102696, 102697, 106301, 286620
DESCRIPTION:
Model: Bendix Tu-Flo 501 (TF-501) Mack Extended Flange Air Brake Compressor
Vehicles: Mack E6 engine platform applications requiring TF-501 extended flange compressor fitment
• Mounting: Extended flange, engine drive, equipped for power steering
• Cooling: Water / air cooled
• Air Inlet Location: Right
• Air Outlet Location: Top
• Discharge Type: Threaded
• No. of Cylinders: 2
• Bore x Stroke: 2.625 in x 1.50 in
• Displacement @ 1250 RPM: 12 CFM
• Displacement Per Revolution: 16.5 cu in
• Max RPM: 3000 naturally aspirated
• HP @ 3000 RPM / 100 PSI: 4.9 HP
• Minimum Coolant Flow @ Max RPM: 2.5 GPM
• Minimum Unload Pressure: 60 PSI
• Temperature Range: 250°F inlet / 400°F discharge
• Line Sizes: 5/8 in OD copper discharge, 5/8 in OD oil return, 1/4 in OD oil supply, 1/4 in OD unloader, 5/8 in ID inlet cavity to air cleaner, 1/2 in OD coolant
• Includes: Installation gaskets
Applications:
Used on Mack E6 engine applications requiring a TF-501 compressor with extended flange mounting, engine drive, power steering drive provision, right-side inlet, and top-threaded discharge. Match by OE number, Mack extended flange configuration, power steering drive setup, port orientation, and discharge routing before installation.
CROSS-REFERENCE(S):
286620X, BW286620X, BW-286620X, BEP286620X, MIDEL13111X, EL13111, EL13111X
A cross-reference listing means this part may be a suitable replacement for the listed part numbers. Always verify fitment before installation.
IMPORTANT INSTALLATION NOTES:
✔ Verify Mack E6 extended flange fitment, engine-drive setup, and power steering drive provision before installation
✔ Confirm right-side inlet and top-threaded outlet orientation viewed from the rear of the compressor
✔ Match threaded top discharge routing to the original Mack compressor setup
✔ Use installation gaskets and verify coolant, oil, unloader, inlet, and discharge lines are clean before startup
✔ Typical flange mount torque: 80–100 ft-lb
SOLD AS REMANUFACTURED | CORE RETURN REQUIRED
Built to OEM standards | thoroughly cleaned, inspected, and tested to ensure durability, performance, and reliability in demanding applications.
Warranty Information
