FPK30123 | Guide Pin Kit (PAN19 / PAN22 Caliper)

GUIDE PIN KIT – WABCO PAN19 / PAN22 CALIPERS

PART NUMBER(S):
Fleet Products: FPK30123 (New) | OE: 30123CE, 0810 30123, BTW30123, WABPAN192204, 1628065, 3 434 3828 00, 85108166, 5001 866 626, 12 999 776, 6500700, CWSK.6, 40 195.1, 40 225.1 | Automann: RAD30123

DESCRIPTION:

Model: WABCO PAN19 / PAN22
Engines: N/A
Vehicles: IMT and Hendrickson axles with PAN19 or PAN22 calipers (Utility, Great Dane, Wabash trailers)
• Kit Type: Guide Pin Repair Kit
• Caliper Types: WABCO PAN19.1, PAN19.2, PAN22.1, PAN22.5
• Compatible Calipers:
 – FP40195037WCX (PAN19, IMT Carrier, LH)
 – FP40195038WCX (PAN19, IMT Carrier, RH)
 – FP40225015WC-G (PAN22, IMT Carrier, LH)
 – FP40225016WC-G (PAN22, IMT Carrier, RH)
 – FP40225015WCX (PAN22, IMT Carrier, LH)
 – FP40225016WCX (PAN22, IMT Carrier, RH)
 – FP6402250800WC-G (PAN22, Hendrickson Carrier, LH)
 – FP6402250810WC-G (PAN22, Hendrickson Carrier, RH)
 – FP6402250800WCX (PAN22, Hendrickson Carrier, LH)
 – FP6402250810WCX (PAN22, Hendrickson Carrier, RH)
• Mounting Hardware Contents:
 – Guide Pins: Ø37.7 mm × 76 mm, Ø38 mm × 118 mm
 – Bolts: M16 × 1.5 × 80 mm, M16 × 1.5 × 120 mm
 – Bushings: 3× Teflon bushings (Ø42 × Ø38 × 30 mm)
 – Seals: 2× guide pin gaiters, 1× bolt dust excluder, 2× steel caps (Ø42.1 × 17/29 mm)
 – Accessories: 2× Ø44.5 mm rings, 1× plug, grease
• Materials: OEM-grade steel, rubber, Teflon
• Product Type: OE-specification premium trailer caliper repair kit
Applications:
Designed for WABCO PAN19 and PAN22 caliper systems on heavy-duty trailer axles. Provides a complete OE-spec hardware replacement solution for servicing the guide pins and bushings. Not for MAXXUS or Bendix ADB22X systems.

CROSS-REFERENCE(S):

A cross-reference listing means this part may be a compatible replacement for these part numbers based on OEM or distributor data.

IMPORTANT INSTALLATION NOTES:

✔ Use only on WABCO PAN19 and PAN22 trailer calipers
✔ Replace both guide pins and bushings during service for optimal performance

✔ Clean and prep the caliper mounting surface; ensure it is flat and free of corrosion.
✔ Lubricate all moving components with included grease
✔ Mount components and torque fasteners to OE specifications (refer to WABCO service documentation)
✔ Turn the adjuster COUNTER-CLOCKWISE until the brake pads just contact the rotor (do not over-tighten).
✔ Then turn CLOCKWISE 1/4 turn to set clearance.

✔ Confirm system air pressure is between 100–120 psi.
✔ Block and secure wheels to prevent any movement.
✔ Depress the emergency brake release button on the dash to release spring brakes.
✔ Only after the wheels are secure and spring brakes are released should you proceed with caliper adjustment.

WHY CHOOSE FLEET PRODUCTS | KBR - HEAVY DUTY TRUCK & TRAILER PARTS?